300kW High-Flow Submersible Pump Successfully Completed for 1,000 m³/h and 110 m Head Application

A high-capacity 300kW submersible water pump designed for demanding large-flow and high-head water transfer applications has recently completed production and assembly. The pump is engineered to deliver a rated flow of 1,000 m³/h at a head of 110 meters, operating on a 380V, 50Hz power supply.

With its combination of high flow capacity, substantial lifting head, and heavy-duty 300kW motor, this pumping unit is suitable for large-scale industrial water transfer, municipal water supply, agricultural irrigation, reservoir water intake, mine drainage, and other engineering projects requiring continuous high-volume pumping.

The main operating parameters of this customized pumping unit are:

• Rated Flow: 1,000 m³/h
• Rated Head: 110 m
• Motor Power: 300 kW
• Rated Voltage: 380 V
• Frequency: 50 Hz
• Pump Type: Large-Capacity Submersible Water Pump
• Application: High-flow and high-head water transfer

The pump consists of a large multistage hydraulic section and a heavy-duty submersible motor. As shown during production and inspection, its robust structure is designed to withstand demanding operating conditions while providing stable hydraulic performance.

Delivering 1,000 cubic meters of water per hour at a 110-meter head requires careful matching between the pump's hydraulic components and the 300kW submersible motor. The multistage pump structure is designed to generate the required pressure while maintaining the high flow rate needed for large engineering projects.

This type of 300kW high-flow submersible pump can be used for applications such as municipal water supply systems, industrial raw water intake, agricultural irrigation, mine dewatering, reservoir pumping, emergency drainage, and large-scale infrastructure projects.

Compared with conventional small-capacity pumps, a properly selected large submersible pump can provide a compact pumping solution where substantial water volumes must be transferred over significant vertical distances.

For large pumps operating at 300kW power, manufacturing quality and performance verification are essential. Key components must be carefully machined and assembled to ensure proper alignment, structural strength, hydraulic efficiency, and reliable motor operation.

Before delivery, the pump can be inspected and tested according to project requirements. Important parameters include flow rate, head, motor performance, vibration, and overall operating stability. This process helps verify that the selected pump configuration matches the intended working conditions.

Large water transfer projects often require customized pump selection based on actual operating conditions. In addition to flow and head, factors such as voltage, frequency, water quality, installation depth, operating mode, pipe diameter, and required materials should be considered before final pump selection.

For projects requiring a 300kW submersible pump, 1,000 m³/h high-flow pump, 110-meter head water pump, large-capacity deep well pump, or customized industrial water pumping solution, our engineering team can provide pump selection and technical configuration according to specific project parameters.